From Thursday 23.6.2022 to Friday 24.6.2022 the 1st Model-Based Systems Engineering (MBSE) Summit took place. First two inspiring keynotes have been presented, and in the following, challenges and approaches in the field of MBSE were discussed. In small discussion groups,
After two years break due to the Corona restrictions by the government, long night of research could finally again be held on the evening of Friday, 20th of May 2022. The CDL-MINT station was located on the first floor of
EDT.Community Panel Discussion with International Digital Twin Experts
Manuel Wimmer is in the Program Comitee of the International Conference on Quantum Software QSW 2022 , Hybrid Event in Barcelona, Spain, hosted at UPC Terrassa Campus, July 10 – 16, 2022. Submission Deadline, April 1, 2022.
Manuel Wimmer is one of the Program chairs of the 25th International Conference on Model Driven Engineering Languages and Systems MODELS 22, October 23-28, 2022, Montreal, Canada, Submission Deadline: May 18, 2022. Flyer
Workshop – 23rd and 24th of June 2022 The CDL-MINT organizes a Get Together MBSE Workshop where current trends, challenges and solutions in the field of model-based systems engineering are discussed and elaborated. Key Facts Date: 23rd of June and
Manuel Wimmer is one of the Programme chairs of the 25th International Conference on Fundamental Approaches to Software Engineering FASE 2022, April 2 – 7, 2022, Munich, Germany, Submission Deadline: October 14, 2021.
Manuel Wimmer is Co-Organizer of the 3rd Workshop on Artificial Intelligence and Model-driven Engineering, co-located with MODELS 2021, October11, 2021, virtual.
Manuel Wimmer is Co-Organizer of the 2nd LowCode Workshop@MODELS 2021, October 10-15, 2021, virtual.
Manuel Wimmer is Co-Organizer of the 1st International Workshop on Model-Driven Engineering of Digital Twins ModDiT’21 co-located with MODELS 2021, October 10-15, 2021, virtual.
CfP Special Issue in the Journal of Systems and Software on Consistency Management in Software-Intensive Systems, Submission deadline: 29 Oct 2021 https://www.journals.elsevier.com/journal-of-systems-and-software/call-for-papers/special-issue-in-the-journal-of-systems-and-software-on-cons
Manuel Wimmer is one of the organisers of the International workshop on MDE for Smart IoT Systems (MeSS’21), co-located with STAF2021, June 21 – 25, 2020 in Bergen, Norway.
Manuel Wimmer was Keynote speaker at VaMos 2021, February 9 – 11, 2021 at Krems.
Springer Journal of Software and Systems Modeling, Theme Issue: AI-enhanced Model-Driven Engineering Over the past years, we have witnessed a substantial rise of Artificial Intelligence (AI) successfully applied to different domains and, whether we are aware of it or not,
Our paper “Towards a Multi-Objective Modularization Approach for Entity-Relationship Models” has been awarded as the 2020 Best Paper in the ER Forum, Demo and Posters 2020, co-located with 39th International Conference on Conceptual Modeling (ER 2020), Vienna, Austria 2020
Manuel Wimmer is guest editor of “Recent Trends in Engineering Software-Intensive Systems” – Journal of Systems and Software Please contribute your work!
Our paper “Thirteen Years of SysML: A Systematic Mapping Study” has been awarded as the 2019 Best Paper in the Journal of Software and Systems Modeling (SoSyM). It was additionally presented at the MODELS 2019 conference in Munich, Germany.
Our contribution entitled “Generating Structured AutomationML Models from IEC 62264 Information” has been accepted for presentation at the 5th AutomationML PlugFest 2019 in Hamburg, Germany.
Our paper “Flexible Production Systems: Automated Generation of Operations Plans based on ISA-95 and PDDL” has been selected as one of three finalists for the best application paper award at CASE 2019.
Alexander Wurl, Andreas Falkner, Alois Haselböck, Alexandra Mazak, and Peter Filzmoser have received the Best Industrial Paper Award for their paper on “Exploring Robustness in a Combined Feature Selection Approach” at the 8th International Conference on Data Science, Technology and
Join the 1st Workshop on Artificial Intelligence and Model-driven Engineering!
Manuel Wimmer is co-organizing the following workshops at MODELS 2019! https://www.wi-inf.uni-duisburg-essen.de/MULTI2019/ https://mde-intelligence.github.io/ http://www.es.mdh.se/MDE4IoT/ https://msdl.uantwerpen.be/conferences/MPM4CPS/2019/
The Grand Opening of the LIT Open Innovation Center will take place on June 5, 2019, between 14:30 and 22:00! CDL-MINT is part of the Open Innovation Center and will be present with all its researchers during the opening event.
Manuel Wimmer is currently involved in the organization of the following scientific events: International Workshop on Multi-Level Modeling (MULTI) @ MODELS International Workshop on Artificial Intelligence and Model-driven Engineering (MDE Intelligence) @ MODELS International Workshop on Multi-Paradigm Modeling for Cyber-Physical
Austrian newspaper STANDARD published an interview with Prof. Manuel Wimmer about CDL-MINT: Article @ STANDARD (German).
Effective March 1, 2019, CDL-MINT has moved from TU Wien to JKU Linz, following Prof. Manuel Wimmer’s appointment as new Head of Department of Business Informatics – Software Engineering.
Our paper “A Feature-based Survey of Model View Approaches” has been awarded 2018 Best Paper of the Journal of Software and Systems Modeling (SoSyM). The paper has also been presented at the 2018 MODELS conference in Copenhagen, Denmark.
Our paper entitled “A Variability Information Model for OPC UA” has been accepted for presentation at the 23rd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2018) in Torino, Italy.
Our paper entitled “Automated Metamodel/Model Co-Evolution: A Search-Based Approach” has been accepted for presentation at the 10th Symposium on Search-Based Software Engineering (SSBSE 2018) in Montpellier, France.
Our paper entitled “Trace Comprehension Operators for Executable DSLs” has been accepted for presentation at the 14th European Conference on Modelling Foundations and Applications (ECMFA 2018) in Toulouse, France.
Our contribution entitled “IEC 62264-2 for AutomationML” has been accepted for presentation at the 5th AutomationML User Conference in Gothenburg, Sweden.
The 2nd International Workshop on Debugging in Model-Driven Engineering (MDEbug) will take place on October 16, 2018 in Copenhagen, Denmark. It will be co-localted with the MODELS conference, the premier venue for model-driven software and systems engineering research.
The 2nd International Workshop on Model-Driven Engineering for IoT (MDE4IoT) will take place on October 15, 2018 in Copenhagen, Denmark. It will be co-localted with the MODELS conference, the premier venue for model-driven software and systems engineering research.
Our paper entitled “AutomationML, ISA-95 and Others: Rendezvous in the OPC UA Universe” has been accepted for presentation at the 14th IEEE International Conference on Automation Science and Engineering (CASE 2018) in Munich, Germany.
Our paper entitled “Aligning Business Services with Production Services: The Case of REA and ISA-95” has been accepted for presentation at the 10th IEEE International Conference on Service Oriented Computing and Applications (SOCA 2017) in Kanazawa, Japan.
The official opening of the CDL-MINT was a great event with lots of insight into the research agenda of the laboratory and the strategic positioning of the Christian Doppler Laboratory funding program from various points of view.
Our paper “A View on Model-Driven Vertical Integration: Alignment of Production Facility Models and Business Models” has been accepted for presentation at the 13th IEEE Conference on Automation Science and Engineering (CASE 2017) in Xi’an, China.
The 4th International Workshop on Multi-Level Modelling (MULTI) will also be co-located with the MODELS 2017 conference during the week Sept 17-22, 2017. As interest in multi-level modelling grows, and the range of multi-level modelling tools expands, there is growing
The 1st International Workshop on Model Debugging in MDE (MDEbug) will also be co-located with the MODELS 2017 conference during the week Sept 17-22, 2017. Locating the source of an observable defect is still nowadays one of the main activities
We co-organized and participated to the workshop “MDE in Industry 4.0” with three other universities: RWTH Aachen, University of Rennes and Ecole des Mines de Nantes. Through presentations and discussions, the goal of this workshop was to discuss on the
First International Workshop on Model-Driven Engineering for the Internet of Things (MDE4IoT), at the 7th International Conference on the Internet of Things (IoT 2017) October 22-25, 2017, Linz, Austria.
The special session “Model Driven Engineering and Evolution of CPPS and their Services” will take place during the 13th IEEE Conference on Automation Science and Engineering (CASE).
The track Model-based development, Components and Services (MOCS) will be part of SEAA 2017. Two of the major current trends in software engineering are: the increasing emphasis on model-driven engineering, and the increasingly central role of component-based and service-based paradigms
We cooperate with the HTL Waidhofen/Ybbs in the project “HTL 4.0 – Digital Production and Networked Working Units” by optimising digital production in terms of predictive maintenance. This cooperation starts early 2018.
The 1st International Workshop on Model-Driven Engineering for the Internet of Things will be co-located with the 7th International Conference on the Internet of Things (IoT 2017).
The official Kick-Off for the Christian Doppler Laboratory on Model-Integrated Smart Production will take place on May 22, 2017 (14:00) at the TU Wien.
Petr Novak has successfully defended his PhD thesis titled “Design and Integration of Simulation Models for Industrial Systems” at the Czech Technical University in Prague, Faculty of Electrical Engineering
Our paper “Entwining Plant Engineering Data and ERP Information: Vertical Integration with AutomationML and ISA-95” has been accepted for presentation at the 3rd IEEE International Conference on Control, Automation and Robotics (ICCAR 2017) in Nagoya, Japan.
Our paper “ISA-95 based Task Specification Layer for REA in Production Environments” has been accepted for presentation at the 11th International Workshop on Value Modeling and Business Ontologies (VMBO 2017) in Belvaux, Luxembourg.
The Christian Doppler Laboratory on Model-Integrated Smart Production has started work per January 1, 2017.